Fwiw: the hoops are automated these days if you are on xgspon.
It's "plug in sfp+, upload firmware using web interface, enter equipment serial number"
You can even skip step 2 depending on the sfp stick you use.
The 802.1x state is not actually verified server side. The standard says modems should not pass traffic when 802.1x is required but not done. Most do anyway or can be changed to do so. AT&T side does not verify, and always passes traffic. That is what is happening under the covers.
It's "plug in sfp+, upload firmware using web interface, enter equipment serial number"
You can even skip step 2 depending on the sfp stick you use.
The 802.1x state is not actually verified server side. The standard says modems should not pass traffic when 802.1x is required but not done. Most do anyway or can be changed to do so. AT&T side does not verify, and always passes traffic. That is what is happening under the covers.